SK-404

Doc no. SK-404DatasheetRev 2026.11Sheet 2.5 of 4

H5

Pi 5 HomeLab Rack

Printed 10-inch, 9U mini rack built around a Raspberry Pi 5, with print files, STEP and Onshape CAD and a build checklist.

Prototype

01

Block diagram

Gateway1U Touchscreen3U · 7-inch HDMI, touch Label-printer dock3U · face out Pi 5 unit2U · NVMe · mini UPS 12 V brickinside the rack 10-inch rack · 9U = 1 + 3 + 3 + 2 USB budget: screen + printer use 1.3–1.5 A of 1.6 A
Fig. 1: The 9U build, unit by unit
02

Characteristics

Size10-inch, 9U mini rack, 280 mm wide × 200 mm deep, with silver sides, a vented cap and U handles
Standard10-inch rack standard: 236.525 mm rail holes, EIA pattern, 224 mm clear, M5 mounts
Build1U gateway, 3U touchscreen, 3U label-printer dock and a 2U Pi 5 unit, with the 12 V supply inside the rack
PrintFits a 256 mm print bed; PLA for the rack, dock and screen, PETG near heat
CADMaster 2-in-1 STEP with the standard 200 mm and the slim 140 mm racks side by side, plus an Onshape import package
ChecksEvery check report is a calculation on the 3D models, not a physical test
  • 3D printing
  • CAD
  • Raspberry Pi 5
03

Overview & build notes

A printable 10-inch, 9U mini rack following Jeff Geerling's 10-inch rack standard (236.525 mm rail hole pitch, 224 mm clear opening). Each bay houses a real desktop node cleanly: 1U for a UniFi Cloud Gateway Ultra, 3U for a 7-inch capacitive touchscreen, 3U for a face-out thermal label-printer dock, and 2U for the Raspberry Pi 5, NVMe storage, mini UPS and concealed 12 V power brick.

Two mechanical frames live side by side in the master STEP assembly: a full 200 mm desktop depth version with an internal rear brick cradle, and a 140 mm Slim Cargo prototype designed to break down flat and pack inside carry-on luggage with an external power brick.

Every STL and 3mf build plate in 01_PRINT_FILES/ is checked geometrically for bounding-box bed fit (within a 256 mm Bambu P1S plate), manifold watertightness and cable clearances (03_CHECKS/).

04

Figures & renders

Studio render of the loaded 9U 10-inch mini rack with all four bays populated
Fig. 2 Loaded 9U front elevation: gateway (1U), touchscreen (3U), label dock (3U) and Pi 5 bay (2U)
Exploded isometric render separating the frame rails, trays, handles and faceplates
Fig. 3 Exploded view of the modular printed frame, heat-set insert joints and removable unit bays
Exploded 2U Raspberry Pi 5 bay showing UPS tray, shelf, faceplate and case mount
Fig. 4 2U Pi 5 compute bay with internal UPS cradle, shelf gussets and clean front faceplate
Engineering comparison sheet showing 200 mm standard vs 140 mm slim depth profiles
Fig. 5 System dimensional schematic comparing the 200 mm desktop build and 140 mm slim travel profile
05

Files & artifacts

KindFileDetailsSize
AuditMEASUREMENTS_every_part.mdPer-STL measured bounding boxes, watertight status, material and slicer gram estimates4 KB
STEP CADPi5_HomeLab_9U_Standard_Master.stepFull 200 mm standard 9U master assembly on GitHub21.0 MB
STEP CADPi5_HomeLab_9U_SlimCargo_Master.step140 mm travel-depth Slim Cargo prototype assembly on GitHub17.8 MB
CADPi5_HomeLab_9U_Onshape_Project_Package.zipOnshape import package containing sub-assemblies and part studios19.4 MB
STLs01_PRINT_FILES/Sorted print-ready STL and 3MF plates grouped by print orderFolder

Next on the BenchPi 5 Mini Server