SK-404

Doc no. SK-404DatasheetRev 2026.11Sheet 2.4 of 4

H4

Art PCB Generator

Art PCBs generated from code: an ESP32-C3 with an OLED or e-paper display, white silkscreen and ENIG-gold artwork.

Active

01

Block diagram

board.tomltext · sizes gen_boards.pygeometry · fab Checksverify · lint fab/<board>/Gerbers + zip OrderRobu · JLCPCB hardware/KiCad projects preview·printrenders · 1:1 firmware/PlatformIO
Fig. 1: One generator, every board
02

Characteristics

Generatorboard.toml drives a single Python script (gen_boards.py) that emits outlines, routing, silkscreen and ENIG art together
Form factorsSitting cat silhouettes (67 × 92 mm), Arduino-style card (64 × 48 mm), cat-head badge and round pendant (64 mm)
DisplaysVariants for a 0.96" I²C OLED or a 1.54" WeAct SPI e-paper panel through a front 2×4 socket
ControllerUnified 2×8 rear header supporting ESP32-C3 Super Mini, ESP32-C6 Super Mini or Seeed XIAO boards
FinishMatte black solder mask, high-contrast white silkscreen artwork and exposed ENIG gold copper highlights
  • KiCad
  • ESP32-C3
  • E-paper
03

Overview & build notes

Instead of hand-maintaining separate KiCad layouts for every silhouette, gen_boards.py reads shared dimensions, copper clearances and typography rules from board.toml and procedurally generates the KiCad PCB geometry, teardrops, 45° routing lanes and Gerber zip archives in one pass.

Each shape comes in both OLED and e-paper display variants using matte black solder mask, white vector silkscreen art (inspired by Hokusai's Great Wave) and exposed ENIG gold copper openings behind the matte mask.

On the e-paper boards (cat_epaper_blank, badge, card and pendant), the rear socket accommodates full 16-pin Super Mini or 12-pin XIAO footprints while routing every SPI signal cleanly on the front face without vias.

04

Figures & renders

Front Gerber render of the black and gold Great Wave OLED cat PCB
Fig. 2 Cat + Great Wave (OLED): white silkscreen wave crest with exposed ENIG gold sky
Front Gerber render of the blank e-paper cat PCB variant R15
Fig. 3 Blank e-paper cat (R15): front-routed SPI bus for a 1.54-inch WeAct e-paper panel
Front Gerber render of the compact cat-head badge PCB variant E2
Fig. 4 E-paper cat badge (E2): compact 2×8 rear MCU footprint with dual lanyard ears
Front Gerber render of the 64 by 48 mm Arduino-style e-paper card PCB
Fig. 5 E-paper card (E2): 64 × 48 mm card factor with M3 corner mounting holes
05

Files & artifacts

KindFileDetailsSize
Gerbercat_epaper_blank_gerbers.zipR15 2-layer Gerber and drill fabrication package for the unpersonalized e-paper cat232 KB
KiCadcat_epaper_blank.kicad_pcbGenerated KiCad board source for the R15 e-paper cat silhouette1.5 MB